Signs it’s time for a new system
One of these on its own isn’t always a reason to replace. Two or three together usually are.
The compressor or the indoor coil has failed. These are the biggest parts in the system, and putting a new one into old equipment often doesn’t add up.
It still runs on R-22. R-22 hasn’t been made or imported in the U.S. since 2020, so every recharge comes from a shrinking supply.
It needs refrigerant every summer. That means a leak, and on an older coil the leak tends to come back.
It can’t keep up in July. It runs all afternoon, never reaches the setting, and the house feels damp.
The repair bills are stacking up. Two or three repairs in a couple of years on an aging system is a pattern, not bad luck.
It’s getting old. ENERGY STAR lists a system that is “more than 10 years old” as a reason to consider replacing it.
Repair or replace: how to decide
Weigh two things: how old the system is, and what the repair costs. A big repair on a young system is usually worth it. The same repair on an older R-22 system often isn’t, because the next part is likely close behind.
Ask for both prices side by side, and ask what else is wearing out. If the coil is rusting and the fan motor is next, the real choice is replacing now or replacing after you’ve paid for the repair. If your system is newer and the problem is something like a capacitor or a clogged drain line, start with our AC repair page instead. The full checklist is in our guide should you repair or replace your AC.
Sizing: why bigger isn’t better in Houston
Many replacements are sized by copying the old unit’s label or by square footage. Both can be wrong. The old unit may never have been the right size, and square footage ignores windows, attic insulation and ducts running through a hot attic.
The industry standard is a Manual J load calculation from ACCA (Air Conditioning Contractors of America). It works out how much heat and moisture your house picks up on a hot day. Manual S uses those numbers to choose equipment, including how well it removes humidity, and Manual D covers sizing the ducts.
Why it matters here: an oversized AC cools the air fast and shuts off before it pulls the water out. The house feels cool but clammy, and the short on-off runs are harder on the parts. Before you sign, ask how the size on your quote was chosen. More in our guide what size AC do I need.
What changed in 2026 (checked November 2026)
New refrigerants. New central AC and heat pump systems are built for lower-impact refrigerants, usually R-454B or R-32. R-410A systems made before January 1, 2025 can still be installed while supply lasts (see the questions below), and an R-410A system you already have can still be used and repaired.
No federal tax credit in 2026. The federal Energy Efficient Home Improvement Credit (Section 25C) ended for equipment placed in service after December 31, 2025, under Public Law 119-21. An AC or heat pump installed in 2026 doesn’t qualify. If a quote still promises that credit, ask about it.
SEER2 minimums. Since January 1, 2023, efficiency has been rated in SEER2. Texas is in the Department of Energy’s Southeast region, where a new split-system central AC must be at least 14.3 SEER2 below 45,000 Btu/h and 13.8 SEER2 at 45,000 Btu/h and up. A split heat pump must be at least 14.3 SEER2 and 7.5 HSPF2. For comparison, the Department of Energy’s efficient-purchase level for the Southeast is 15.2 SEER2.
Single-stage, two-stage or variable-speed
A single-stage system is either on full or off. A two-stage system has a lower setting it uses most of the time, so it runs longer and quieter, which helps with humidity. A variable-speed system adjusts in small steps to match the heat of the day. The right choice depends on your house, how long you plan to stay and your budget.
AC and furnace, or a heat pump?
A heat pump looks like an AC outside but also heats the house. If you’re replacing anyway, ask whether one fits your home, and see our heat pump page.
Brands we install
We install Goodman, Carrier, Trane and Lennox systems. The brand matters less than the right size, a matched indoor coil and a careful install, so we explain the difference between models on your estimate instead of pushing one name. We don’t install or service ductless mini-splits.
What affects the cost
We don’t post prices because no two replacements are the same. These are the things that move the number:
• The size (capacity) of the system
• The SEER2 rating, and whether it’s single-stage, two-stage or variable-speed
• Whether you replace the outdoor unit and coil only, or the furnace or air handler too
• Whether the refrigerant lines can be reused or need replacing
• How hard the attic or closet is to work in
• Duct repairs or changes, if your ducts leak or are too small
• Extras such as a new thermostat, drain pan, float switch or pad
If your home needs electrical work, such as a panel upgrade, we’ll tell you so you can call an electrician. Your estimate lists exactly what’s included.
What a home AC installation looks like in the attic, where the air handler and ductwork come together. Watch on YouTube
Sources: U.S. EPA, refrigerant rules by sector · U.S. EPA, 2026 technology transitions rule · U.S. EPA, 2026 final rule fact sheet (PDF) · U.S. EPA, HFC phasedown questions · U.S. EPA, R-22 phaseout · 10 CFR 430.32, DOE efficiency standards · U.S. DOE, efficient central AC purchasing · IRS, Energy Efficient Home Improvement Credit · ACCA Manual J · ACCA Manual S · ACCA Manual D · ENERGY STAR, when to replace. Checked November 2026.